The Lazy Pet Window Perch provides a comfortable place for your cat to gaze out the window and enjoy long afternoon naps. Each Window Perch is made from sturdy and reliable materials that install right onto your window for a picture-perfect view. Encouraging your cat to use this uniquely designed perch can reduce the amount of time they spend jumping on the furniture or laying uncomfortably on the floor.
The Lazy Pet Window Perch comes in two sizes for single or multi-cat households. Take a look below to see which Window Perch might be best for you.
The Lazy Pet Window Perch requires no tools to set-up or maintain—making it a quick and easy solution to providing your cat with a fun place to take in the sights.
Product | Length | Width | Height | Max Weight |
---|---|---|---|---|
Lazy Pet Window Perch | 24" | 12" | 2" | 25 lbs |
Multi-Cat Window Perch | 27.5" | 14" | 2" | 65 lbs |
Remove all contents from the box. Turn the Window Perch over to expose the wood side and place it on a flat surface so the cover is facing down. Position leg over each set of holes and insert the washer and then thumbscrews. Tighten each thumbscrew so the legs are held in place, but can still be adjusted forward and backward.
Carefully remove the release paper from the fastening tape and firmly place the fastening tape on the window sill with the adhesive side down. The fastening tape should be placed at least ½ inch from the edge of the window sill. Allow at least one hour for the adhesive to set.
Slide the legs forward or backward as needed so the rubber wall protectors are firmly in contact with the wall and are supporting the Window Perch in a horizontal position. Tighten the thumb screws firmly.
Check to make sure the window sill is clean and completely dry. This step is very important to ensure proper bonding of fastening tape to the window sill. The fastening tape is intended to be placed on the window sill and it should be removed from the Window Perch at this time.
Place the Window Perch on the window sill, matching up the fastening tape strip to the strip permanently attached to the front of the Window Perch.
It is recommended that you allow 8 hours before applying weight to the Window Perch. Please test to make sure the Window Perch is solidly mounted before allowing your pet to use it.